Static Route Screens; Static Route Overview; Configuring Ip Static Route; Figure 47 Example Of Static Routing Topology - ZyXEL Communications ZyAir G-2000 PlusV2 User Manual

This chapter shows you how to configure static routes for your ZyXEL device.

9.1 Static Route Overview

Each remote node specifies only the network to which the gateway is directly connected, and
the ZyXEL device has no knowledge of the networks beyond. For instance, the ZyXEL device
knows about network N2 in the following figure through remote node router R1. However, the
ZyXEL device is unable to route a packet to network N3 because it doesn't know that there is a
route through the same remote node router R1 (via gateway router R2). The static routes are
for you to tell the ZyXEL device about the networks beyond the remote nodes.

Figure 47 Example of Static Routing Topology

9.2 Configuring IP Static Route

Click STATIC ROUTE to open the screen as shown next.
Chapter 9 Static Route Screens
C

Static Route Screens

ZyXEL G-2000 Plus v2 User's Guide
H A P T E R
9
129