Resetting The Time; Table 153 Time And Date Setting Fields - ZyXEL Communications P-334WT User Manual

P-334WT User's Guide
The following table describes the fields in this screen.

Table 153 Time and Date Setting Fields

FIELD
Time Protocol
Time Server
Address
Current Time
New Time
Current Date
New Date
Time Zone
Daylight Saving
Start Date
End Date
Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to
Cancel" to save your configuration, or press [ESC] to cancel.

35.3.1 Resetting the Time

The Prestige resets the time in three instances:
1 On leaving menu 24.10 after making changes.
2 When the Prestige starts up, if there is a timeserver configured in menu 24.10.
3 24-hour intervals after starting.
370
DESCRIPTION
Enter the time service protocol that your timeserver sends when you turn on the
Prestige. Not all timeservers support all protocols, so you may have to check with
your ISP/network administrator or use trial and error to find a protocol that works.
The main differences between them are the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC-868) format displays a 4-byte integer giving the total number of
seconds since 1970/1/1 at 0:0:0.
NTP (RFC-1305) the default, is similar to Time (RFC-868).
None enter the time manually.
Enter the IP address or domain name of your timeserver. Check with your ISP/
network administrator if you are unsure of this information. The default is
tick.stdtime.gov.tw
This field displays an updated time only when you reenter this menu.
Enter the new time in hour, minute and second format.
This field displays an updated date only when you reenter this menu.
Enter the new date in year, month and day format.
Press [SPACE BAR] and then [ENTER] to set the time difference between your
time zone and Greenwich Mean Time (GMT).
Daylight Saving Time is a period from late spring to early fall when many countries
set their clocks ahead of normal local time by one hour to give more daylight time in
the evenings. If you use daylight savings time, then choose Yes.
Enter the day and time that your daylight-savings time starts on if you selected Yes
in the Daylight Saving field.
Enter the day and time that your daylight-savings time ends on if you selected Yes
in the Daylight Saving field.
Chapter 35 System Maintenance