Edit Ip; Figure 163 Menu 11.1 Remote Node Profile For Pptp Encapsulation; Table 126 Menu 11.1 Remote Node Profile For Pptp Encapsulation - ZyXEL Communications P-334WT User Manual

Figure 163 Menu 11.1 Remote Node Profile for PPTP Encapsulation

Rem Node Name= MyISP
Active= Yes
Encapsulation= PPTP
Service Type= Standard
Service Name= N/A
Outgoing:
My Login=
My Password= ********
Retype to Confirm= ********
Authen= CHAP/PAP
PPTP:
My IP Addr=
My IP Mask=
Server IP Addr=
Connection ID/Name=
The next table shows how to configure fields in menu 11.1 not previously discussed.

Table 126 Menu 11.1 Remote Node Profile for PPTP Encapsulation

FIELD
Encapsulation
My IP Addr
My IP Mask
Server IP Addr
Connection ID/
Name

26.3 Edit IP

Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes.
Press [ENTER] to open Menu 11.3 - Remote Node Network Layer Options.
Chapter 26 Remote Node Configuration
Menu 11.1 - Remote Node Profile
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Press [SPACE BAR] and then [ENTER] to select PPTP. You must also go to menu
11.3 to check the IP Address setting once you have selected the encapsulation
method.
Enter the IP address of the WAN Ethernet port.
Enter the subnet mask of the WAN Ethernet port.
Enter the IP address of the ANT modem.
Enter the connection ID or connection name in the ANT. It must follow the "c:id" and
"n:name" format.
This field is optional and depends on the requirements of your DSL modem.
P-334WT User's Guide
Route= IP
Edit IP= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedules=
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Edit Traffic Redirect= No
295