Wireless Lan Setup; Figure 155 Menu 3.5: Wireless Lan Setup - ZyXEL Communications P-334WT User Manual

Table 117 Menu 3.2.1: IP Alias Setup
FIELD
IP Subnet Mask
RIP Direction
Version
Incoming Protocol
Filters
Outgoing Protocol
Filters
When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm...] to
save your configuration, or press [ESC] at any time to cancel.

24.4 Wireless LAN Setup

Use menu 3.5 to set up your Prestige as the wireless access point. To edit menu 3.5, enter 3
from the main menu to display Menu 3 - LAN Setup. When menu 3 appears, press 5 and then
press [ENTER] to display Menu 3.5 - Wireless LAN Setup as shown next.

Figure 155 Menu 3.5: Wireless LAN Setup

ESSID= ZyXEL
Hide ESSID= No
Channel ID= CH06 2437MHz
RTS Threshold= 4096
Frag. Threshold= 4096
WEP Encryption= Disable
Default Key= N/A
Key1= N/A
Key2= N/A
Key3= N/A
Key4= N/A
Authen. Method= N/A
Chapter 24 Menu 3 LAN Setup
DESCRIPTION
Your Prestige will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the subnet
mask computed by the Prestige.
Press [SPACE BAR] and then [ENTER] to select the RIP direction. Options are
Both, In Only, Out Only or None.
Press [SPACE BAR] and then [ENTER] to select the RIP version. Options are RIP-
1, RIP-2B or RIP-2M.
Enter the filter set(s) you wish to apply to the incoming traffic between this node
and the Prestige.
Enter the filter set(s) you wish to apply to the outgoing traffic between this node
and the Prestige.
Menu 3.5 - Wireless LAN Setup
Press ENTER to Confirm or ESC to Cancel:
P-334WT User's Guide
Edit MAC Address Filter= Yes
Edit Roaming Configuration= Yes
Preamble= Long
802.11 Mode= Mixed
283