Back To Factory Defaults; Figure 140 Configuration Restore Successful; Figure 141 Temporarily Disconnected; Figure 142 Configuration Restore Error - ZyXEL Communications P-334WT User Manual

P-334WT User's Guide

Figure 140 Configuration Restore Successful

The Prestige automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.

Figure 141 Temporarily Disconnected

If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default Prestige IP address (192.168.1.1). See
your Quick Start Guide for details on how to set up your computer's IP address.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.

Figure 142 Configuration Restore Error

20.2.3 Back to Factory Defaults

Pressing the Reset button in this section clears all user-entered configuration information and
returns the Prestige to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory defaults of your
Prestige. Refer to the chapter about introducing the web configurator for more information on
the RESET button.
264 Chapter 20 Tools