Figure 131 Dynamic Dns; Table 103 Dynamic Dns - ZyXEL Communications P-334WT User Manual

Figure 131 Dynamic DNS

The following table describes the labels in this screen.

Table 103 Dynamic DNS

LABEL
Enable Dynamic DNS
Service Provider
Dynamic DNS Type
Host Name
User Name
Password
Enable Wildcard Option Select the check box to enable DynDNS Wildcard.
Enable off line option
IP Address Update Policy:
Use WAN IP Address
Dynamic DNS server
auto detect IP Address
Use specified IP
Address
Apply
Reset
Chapter 18 System
DESCRIPTION
Select this check box to use dynamic DNS.
Select the name of your Dynamic DNS service provider.
Select the type of service that you are registered for from your Dynamic DNS
service provider.
Enter a host names in the field provided. You can specify up to two host
names in the field separated by a comma (",").
Enter your user name.
Enter the password assigned to you.
This option is available when CustomDNS is selected in the DDNS Type
field. Check with your Dynamic DNS service provider to have traffic redirected
to a URL (that you can specify) while you are off line.
Select this option to update the IP address of the host name(s) to the WAN IP
address.
Select this option to update the IP address of the host name(s) automatically
by the DDNS server. It is recommended that you select this option.
Type the IP address of the host name(s). Use this if you have a static IP
address.
Click Apply to save your changes back to the Prestige.
Click Reset to begin configuring this screen afresh.
P-334WT User's Guide
253