No Security; Figure 34 Wireless: No Security; Table 27 Wireless - ZyXEL Communications P-334WT User Manual

P-334WT User's Guide
The following table describes the general wireless LAN labels in this screen.

Table 27 Wireless

LABEL
Enable
Wireless LAN
Name(SSID)
Hide SSID
Channel
Selection
Apply
Reset
See the rest of this chapter for information on the other labels in this screen.

4.4.1 No Security

Select No Security to allow wireless stations to communicate with the access points without
any data encryption.
Note: If you do not enable any wireless security on your Prestige, your network is
accessible to any wireless networking device that is within range.

Figure 34 Wireless: No Security

86
DESCRIPTION
Click the check box to activate wireless LAN.
(Service Set IDentity) The SSID identifies the Service Set with which a wireless
station is associated. Wireless stations associating to the access point (AP) must
have the same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII
characters) for the wireless LAN.
Select this check box to hide the SSID in the outgoing beacon frame so a station
cannot obtain the SSID through scanning using a site survey tool.
Set the operating frequency/channel depending on your particular region.
Select a channel from the drop-down list box.
Refer to the Connection Wizard chapter for more information on channels.
Click Apply to save your changes back to the Prestige.
Click Reset to reload the previous configuration for this screen.
Chapter 4 Wireless LAN