Services Screen; Table 60 Firewall General - ZyXEL Communications P-334WT User Manual

The following table describes the labels in this screen.

Table 60 Firewall General

LABEL
Enable Firewall
Bypass Triangle
Route
Max NAT/Firewall
Session Per User
LAN to WAN
Log
WAN to LAN
Log
Apply
Reset

9.3 Services Screen

Click the Firewall link under Security and the Services tab. The screen appears as shown
next. Use this screen to enable service blocking, enter/delete/modify the services you want to
block and the date/time you want to block them.
Chapter 9 Firewall
DESCRIPTION
Select this check box to activate the firewall. The Prestige performs access control
and protects against Denial of Service (DoS) attacks when the firewall is activated.
Select this check box to have the Prestige firewall ignore the use of triangle route
topology on the network. See the appendix for more on triangle route topology.
Type a number ranging from 1 to 2048 to limit the number of NAT/firewall sessions
that a host can create.
To log packets related to firewall rules, make sure that Access Control under Log
is selected in the Logs, Log Settings screen.
Choose what LAN to WAN packets to log. Choose from:
No Log
Log Blocked (blocked LAN to WAN services which appear in the Blocked
Services textbox in the Services screen (with Enable Services Blocking
selected))
Log All (log all LAN to WAN packets)
To log packets related to firewall rules, make sure that Access Control under Log
is selected in the Logs, Log Settings screen.
Choose what WAN to LAN and WAN to WAN/Prestige packets to log. Choose
from:
No Log
Log Forwarded (see how to forward WAN to LAN traffic in the next section)
Log All (log all WAN to LAN packets).
Click Apply to save the settings.
Click Reset to start configuring this screen again.
P-334WT User's Guide
149