The following table describes the labels in this screen.
Table 28 Wireless No Security
LABEL
Security Mode
Apply
Reset
4.4.2 WEP Encryption
WEP encryption scrambles the data transmitted between the wireless stations and the access
points to keep network communications private. It encrypts unicast and multicast
communications in a network. Both the wireless stations and the access points must use the
same WEP key.
Your Prestige allows you to configure up to four 64-bit, 128-bit or 256-bit WEP keys but only
one key can be enabled at any one time.
In order to configure and enable WEP encryption; click Wireless LAN and Wireless to the
display the Wireless General screen.
4.4.3 Static WEP Encryption
In order to configure and enable WEP encryption; click the Wireless LAN link under
Network to display the Wireless General screen. Select Static WEP from the Security
Mode list.
Chapter 4 Wireless LAN
DESCRIPTION
Choose No Security from the drop-down list box.
Click Apply to save your changes back to the Prestige.
Click Reset to reload the previous configuration for this screen.
P-334WT User's Guide
87