User Naming - Sanwa M11X Operating Manual

user naming

The User Name function allows you to input a User Name to register the transmitter. The User Name can be displayed in the
Programming Window when the Battery (BATT) menu is active. The User Name can consist of up to 12 letters, numerals, or symbols.
Press the ENTER key to move the cursor to the right and press the
1) Press the Function key to highlight the USER menu.
The cursor will blink below USER NAME.
2) Press the INC/+ or DEC/- keys to select a character,
then press the ENTER key to advance the cursor to the
next space. Repeat to enter the rest of the characters.
To erase a character, move the cursor under the character you want to erase, then press the INC/+ and DEC/- keys at the
same time until the single dark block (Erase Block) is selected. The underlined character will be erased.
A group of character styles can be selected by pressing the INC/+ and DEC/- keys at the same time. Choose from capital
letters, lower case letters, symbols, higher case numerals, and lower case numerals.
When entering a character in a position occupied by a space, a group can be selected from the preceding character by first
pressing the DEC/- key. This is useful when entering several characters from the same group.
THIS SPACE INTENTIONALLY LEFT BLANK
Function Page 3 (uSER)
key to move the cursor to the left.
Page 54