Servo Speed - Sanwa M11X Operating Manual

servo speed

The Speed function slows down the servo speed during use. When driving your model, proper steering and braking are vital. The
steering Speed setting helps to limit excessive steering, which will enable you to achieve smoother cornering. The Speed function can
also be set on the Brake side of the throttle to help ensure that the brakes don't react to quickly or become too 'touchy'.
[ ST ] STEErING SErvO SPEEd
Neutral
POINT
(5% to 100%)
FORWARD Setting
1) Press the Function key to highlight the SPEED menu. [ST] will be active
in the Programming Window and the cursor will default to FORWARD.
2) Press the INC/+ or DEC/- keys to set the desired FORWARD value.
SPEED ST FORWARD setting range is 0 to -100. The default setting is
0. The FORWARD setting adjusts the SPEED of the servo from Neutral
to the Right or the Left.
RETuRN Setting
1) Press the ENTER key to move the cursor to RETURN, then press the
INC/+ or DEC/- keys to set the desired RETURN value.
SPEED ST RETURN setting range is 0 to -100. The default setting is 0.
The RETURN setting adjusts the SPEED of the servo back to Neutral.
POINT Setting
1) Press the ENTER key to move the cursor to POINT, then press the
INC/+ or DEC/- keys to set the desired POINT value.
SPEED ST POINT setting range is 5% to 100%. The default setting is
100%. The POINT setting locates the actual point in the servo travel that
you want to slow the servo's movement.
It is advisable to use both Steering Speed and Exponential functions
together to achieve the best combination of steering operation.
ACT/INH Setting
1) To use the SPEED ST function, it must be Activated. Press the ENTER
key to move the cursor to SPEED, then press the INC/+ or DEC/- keys
to either ACT (Activate) or INH (Inhibit) the SPEED ST function.
The SPEED ST ACT/INH setting can be assigned to any Push-Button
switch, using the Key Assign function. See page 50 for more
information. By using this function, switching SPEED ST 'ON' or 'OFF' can
be selected during model operation.
The Steering Servo Speed function affects left and right steering
equally, and the Return to Neutral. The Steering Speed function will
only be noticeable within this area. The Steering Speed function will
not be noticeable within the outlying shaded areas.
POINT
(5% to 100%)
Page 25
Function Page 1 (SPEED)
Actual steering operation is slower than the actual speed of the
steering servo.