Sanwa M11X Operating Manual page 51

key assignments
1) Press the Function key to highlight the -ASG menu. [SW] will be active
in the Programming Window and the cursor will default to FUNC1.
2) Press the INC/+ or DEC/- keys to set the first desired Function for Sw 1.
3) Press the ENTER key to move the cursor to FUNC2, then press the
INC/+ or DEC/- keys to set the second desired Function for Sw 1.
4) Follow the same procedures to assign and/or change the third desired
Function for Sw1, and for Sw 2 and Sw 3.
When more than one function is assigned to a Push-Button switch, all assigned functions will Activate when the Push-Button
switch is pressed. Be careful that you do not assign functions to the same Push-Button switch that will not work well
together. For example, you wouldn't want to assign negative EXPO and positive ARC to the same Push-Button switch. Timers
must be Activated manually in the Timers Programming Window before they can be controlled by the Push-Button switch. We
suggest Activating only one timer at any given time.
Use the table below to help you assign the different Functions to the Push-Button Switches.
FUNCTION
Exponential - Steering
Exponential - Throttle
Adjustable Rate Control - Steering
Adjustable Rate Control - Throttle
Speed - Steering
Speed - Brake
Anti-Lock Braking
Traction Control - Forward
Traction Control - Return to Neutral
Lap Timer
Interval Timer
Countdown Timer
Starting Position
Starting Position - Brake Lock
Throttle Hold
Compensation Mixing 1
Compensation Mixing 2
[ TRIM ] TRIM KEY ASSIGN
The Trim Key Assign function allows you to assign different Trim functions to any one of the five Trim Switches Trm 1 to Trm 5, and
to the Dial Knob. This allows you to choose the Trim function positions that are best suited to your situation. Trim Resolution, Trim
Type (Center or Parallel) can also be chosen to fine-tune the Trim settings. You can adjust the Trim Switches to work in Normal
or Reverse direction, too.
Current trim assignments
and trim values are shown
in the Trim Switch Function Display
Screen in the Information Window.
MENU INFORMATION WINDOW
EXP-ST
EXP-TH
ARC-ST
ARC-TH
SPD-ST
SPD-BR
ALB
TRC-F
TRC-R
LAP-T
INT-T
DWN-T
S-POS
BR-LCK
TH-HLD
C-MIX1
C-MIX2
Page 51
DEFAULT SWITCH
EXS
EXT
ARS
ART
SPS
SPB
ALB Sw 2
TRF
TRR
LAP Sw 3
INT Sw 3
DWN Sw 3
SPO Sw 1
BRL
HLD
CX1
CX2
Trim
Switch
Function
Display