Function Pages - Sanwa M11X Operating Manual

function pages

The functions of the M11X FHSS-3 2.4GHz transmitter span three pages, F1 to F3. Pressing the
same time displays each of the three function pages in succession - F1, F2, F3...F1, etc. Pressing either the
separately scrolls through the individual functions assigned to the currently highlighted menu on the function page you're
currently viewing. For example, press the Function Key Right to highlight the EPA menu in Function Page 1. The EPA menu will
be highlighted and there will be brackets around [ST] in the Programming Window. Pressing the Function Key Right again
will move the selection brackets to [TH] and so on until the EXP menu is highlighted.
The LCD Display backlighting will turn on when any menu key is pressed. If no menu key is pressed, the LCD display backlighting
will turn off after 10 seconds to conserve battery power. This setting can be changed. See page 46 for more information.
Function Menu F1 consists of the following individual functions:
Steering Dual Rate
l
End Point Adjustment
l
Exponential
l
Adjustable Rate Control
l
Steering / Brake Servo Speed
l
Anti-Lock Braking
l
Traction Control
l
Model Naming / Model Select / Model Copy
l
Function Menu F2 consists of the following individual functions:
Servo Sub-Trim
l
Track Timers
l
Servo Reversing
l
Start Position
l
Throttle Hold
l
Brake Mixing
l
Compensation Mixing
l
Servo Monitor
l
Function Menu F3 consists of the following individual functions:
Transmitter Setup
l
Audio Signal Sound
l
Switch / Trim Assignment
l
User Name
l
Fail-Safe Setup
l
VR-Adjustment
l
Custom Menu Setup
l
Battery Display
l
The Information Window described below is provided on the right side of the display. This makes it possible to determine, at a
glance, the current setting status of various functions from any menu screen.
Encoding Type
Number of
Channels
Steering Trim
Throttle Trim
Trim Feature
Settings
Timer
Information
Active Menu
Active Menu
Programming Area
Help Display Area
Active Selection
Battery Battery
Remaining Voltage
Switch Status
Page 14
Pressing the
between the Information Screen and
the Servo Monitor Screen.
Dual Rate, Brake EPA,
and 3CH Settings
and function keys at the
or function keys
key switches quickly