Sanwa M11X Operating Manual page 35

track timers
Starting the Lap Timer
1) In the default configuration, the Lap Timer Switch is assigned to Sw 3. To start
the Lap Timer, press the Lap Timer Switch. The Lap Timer will start counting up.
Pressing the Lap Timer switch a second time will store the first Lap Time, then begin
counting a second Lap Time and display the Cumulative Time. Each time you press
the Lap Timer Switch, the previous Lap Time is stored, a new Lap Time begins, and
the Cumulative Time is displayed.
Each time you press the Lap Timer Switch, the switch is deactivated for 3 seconds.
The Lap Timer Switch can be assigned to another Push-Button switch, using the Key Assign function. See page 50 for
more information.
The Cumulative Time cannot be manually cleared. It will be automatically cleared when the Lap Timer is restarted.
Stopping the Lap Timer
1) The Lap Timer can be stopped using three different methods:
A) By pressing the Lap Timer switch after the GOAL Time is reached.
B) By pressing and holding the Lap Timer Switch for 3 seconds.
C) By pressing the INC/+ and DEC/- keys at the same time.
When the Lap Timer is stopped, the Lap Timer function is automatically turned OFF. To turn the Lap Timer function back
ON, see Turning On the Lap Timer on the previous page.
verifying Lap Timer Results
1) Lap Timer results can be checked by pressing the
the TIMER LAP menu while the Lap Timer is stopped. The
display shows lap times for 9 different laps on each page.
Press the INC/+ or DEC/- keys to scroll through the different
pages.
Press the INC/+ and DEC/- keys at the same time to return the display to the first 9 laps.
Press the key to return to the TIMER LAP menu.
[ INT ] INTErvAL TIMEr
The Interval Timer notifies you when a set interval elapses while you are driving, giving you an idea of how close you are to your
target time. There are two separate Interval Timers. One Interval Timer for minutes and seconds, and one Interval Timer for
seconds and milliseconds. Both Interval Timers can be used simultaneously and different Tones can be assigned to each.
Turning On the Interval Timers
1) Press the Function key to move the cursor to [INT] in the Programming
Window. The cursor will default to OFF.
2) Press INC/+ or DEC/- keys to turn the Interval Timers ON.
key in
Page 35
Sw 3