End Point Adjustment - Sanwa M11X Operating Manual

end point adjustment

[ 4CH ] AUXILIARY CHANNEL 4 BRAKE END POINT ADJUSTMENT
Auxiliary Channel 4 is used exclusively for braking purposes. When using Auxiliary Channel 4 as the additional BRAKE channel,
End Point Adjustment can be separately set from Auxiliary Channel 3 BRAKE.
In order to set any functions for Auxiliary Channel 4, you must first set the channel setting from 2CH to 4CH. In the default
configuration (FH3 Modulation), the transmitter is set to 4CH Mode. If you are using FH2 Modulation with a legacy FHSS-2
receiver, the default configuration is 2CH Mode. To enable 4CH Mode, see page 47 for more information.
TH
The bar graph is useful when setting the brake on more than two channels.
The graph indicates the center position of two EPAvalues. Use it as a guide for finding a good brake balance. The lower triangles
in the graph indicate the respective EPA values.
When 3CH-BRAKE is set to ACT, the ENTER key switches the balance display between TH-3CH and 3CH-4CH. When
3CH-BRAKE is set to INH, the bar graph shows only the TH-4CH balance.
1) Make sure that 4CH is selected in the SET-UP menu and that 4CH-BRAKE is set to ACT in the BR-MIX menu. See pages
40 and 47 for more information.
2) Press the Function key to move the cursor to [4CH] in the EPA
Programming Window. The cursor will default next to 100%B. Press
the INC/+ or DEC/- keys to increase or decrease the amount of
servo travel.
EPA 4CH-B setting range is between 0% and 160% in the Brake direction. The default setting is 100%.
3) Test-run your model to set the brake adjustment using the
Trm 5 switch. The Trm 5 switch can be used to change the
EPA-B setting without accessing the Programming Menu.
Push the trim switch forward to increase the Brake EPA and
pull the trim switch backward to decrease the Brake EPA.
This is convenient if you need to change the Brake EPA
setting while driving.
The EPA-B setting can be assigned to any desired trim switch using the Key Assign function. See page 51 for more
information.
THIS SPACE INTENTIONALLY LEFT BLANK
Neutral
TH-B EPA POINT
Trm 5
Switch
(Lower)
Page 20
4CH
4CH-B EPA POINT