Yamaha TZ125M1 Owner's Service Manual page 76

FRONT FORK REBOUND DAMPING FORCE
ADJUSTMENT
• STANDARD POSITION:
a
This is the position which is back by the spe-
cific number of clicks from the fully turned-out
position.
Standard position:
2 clicks in
NOTE:
• Fully turn out the adjuster and then turn it in.
Specify the position in which the first click is
heard as the zero position . If a click is heard
just when the adjuster is fully turned out, this
position is zero.
• Preload is 0.5 mm (0.02 in) changed per click
of the adjuster.
C C CAUTION:
Do not force the adjuster past the minimum
or maximum extent of adjustment. The
adjuster may be damaged.
W
Always adjust each front fork to the same
setting. Uneven adjustment can cause poor
handling and loss of stability.
EC36H010
FRONT FORK REBOUND DAMPING FORCE
ADJUSTMENT
1. Adjust:
• Rebound damping force
By turning the adjuster 1.
Stiffer a a ≥
≥ Increase
damping force. (Turn the
adjuster 1 1 in.)
Softer b b ≥
≥ Decrease
damping force. (Turn the
adjuster 1 1 out.)
]
Extent of adjustment:
Maximum
Fully turned-in
position
3-26
INSP
ADJ
the rebound
the rebound
Minimum
Fully turned-out
position