Yamaha TZ125M1 Owner's Service Manual page 144

TRANSMISSION, SHIFT CAM AND SHIFT FORK
7. Check:
• Shift operation
• Transmission operation
Unsmooth operation ≥ Repair.
8. Install:
• O-ring 1N
To oil delivery pipe 2.
NOTE:
Apply the lithium soap base grease on the O-
rings.
9. Install:
• Oil delivery pipe 1
NOTE:
When installing the oil delivery pipe, fit the pro-
jection a of the oil delivery pipe into the hole
b on the crankcase.
10.Install:
• Dowel pin 1
• Transmission housing 2
NOTE:
• Apply the lithium soap base grease on the
crankcase oil seal lip.
• When installing the drive axle into the
crankcase, pay careful attention to the
crankcase oil seal lip.
11. Install:
• Bolt (transmission housing) 1
NOTE:
Tighten the bolts in stages, using a crisscross
pattern.
4-56
ENG
14 Nm (1.4 mdkg, 10 ftdlb)
T