Yamaha TZ125M1 Owner's Service Manual page 166

FRONT WHEEL AND REAR WHEEL
5-5
EC595000
ASSEMBLY AND INSTALLATION
EC515142
Front wheel
1. Install:
• Bearing (right) 1
• Spacer 2
• Bearing (left) 3
NOTE:
• Apply the lithium soap base grease on the
bearing when installing.
• Use a socket that matches the outside diam-
eter of the race of the bearing.
• Right side of bearing shall be installed first.
C C CAUTION:
Do not strike the inner race of the bearing.
Contact should be made only with the outer
race.
2. Install:
• Brake disc 1
• Bolt (brake disc) 2
23 Nm (2.3 mdkg, 17 ftdlb)
GT
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
3. Install:
• Collar 1
4. Install:
• Wheel
NOTE:
Install the brake disc 1 between the brake
pads 2 correctly.
CHAS