Yamaha TZ125M1 Owner's Service Manual page 100

CARBURETOR AND REED VALVE
EC465000
ASSEMBLY AND INSTALLATION
EC465140
Reed valve
1. Install:
NOTE:
• Install the reed valve with the reed valve
• Note the cut a in the lower corner of the reed
C C
Tighten each screw gradually to avoid
warping.
2. Install:
3. Install:
EC4652A1
Carburetor
1. Install:
4-12
• Reed valve 1 1
• Reed valve 2 2
• Stopper (reed valve) 3
• Screw (reed valve) 4
1 Nm (0.1 mdkg, 0.7 ftdlb)
GT
bending as shown.
and stopper plate.
CAUTION:
• Gasket (reed valve assembly) 1N
• Reed valve assembly 2
• Carburetor joint 1
• Bolt (carburetor joint) 2
11 Nm (1.1 mdkg, 8.0 ftdlb)
T
• Power jet 1
To carburetor 2.
ENG