Yamaha TZ125M1 Owner's Service Manual page 223

REAR SHOCK ABSORBER
NOTE:
The length of the spring (installed) changes
1.5mm (0.06 in) per turn of the adjuster.
C C CAUTION:
Never attempt to turn the adjuster beyond
the maximum or minimum setting.
4. Tighten:
• Locknut 1
EC585262
Rear shock absorber
1. Install:
• Dust seal 1
• Collar 2
NOTE:
Apply the lithium soap base grease on the
bearings and collars.
2. Install:
• Upper bracket 1
• Bolt (rear shock absorber–upper bracket) 2
• Plain washer (rear shock absorber–upper
bracket) 3
• Nut (rear shock absorber–upper bracket) 4
NOTE:
Apply the lithium soap base grease on the bolt.
3. Install:
• Rear shock absorber
4. Install:
• Bolt (upper bracket) 1
• Cap 2
5-62
CHAS
40 Nm (4.0 mdkg, 29 ftdlb)
T
34 Nm (3.4 mdkg, 24 ftdlb)
T
40 Nm (4.0 mdkg, 29 ftdlb)
T