Yamaha TZ125M1 Owner's Service Manual page 167

FRONT WHEEL AND REAR WHEEL
5-6
5. Install:
• Wheel axle 1
NOTE:
• Apply the lithium soap base grease on the
wheel axle.
• Insert the wheel axle from right side.
6. Install:
• Plain washer 1
• Nut (wheel axle) 2
48 Nm (4.8 mdkg, 35 ftdlb)
T
7. Tighten:
• Bolt (axle holder) 1
20 Nm (2.0 mdkg, 14 ftdlb)
T
EC525191
Rear wheel
1. Install:
• Bearing (right) 1
• Spacer 2
• Bearing (left) 3
NOTE:
• Apply the lithium soap base grease on the
bearing when installing.
• Use a socket that matches the outside diam-
eter of the race of the bearing.
• Right side of bearing shall be installed first.
C C CAUTION:
Do not strike the inner race of the bearing.
Contact should be made only
outer race.
CHAS
with the