Steering - Yamaha TZ125M1 Owner's Service Manual

EC560000

STEERING

EC568000
HANDLE CROWN AND STEERING DAMPER
15 Nm (1.5 mdkg, 11 ftdlb)
T
1 Handle crown removal
Extend of removal:
Extend of removal Order
Preparation for
removal
1
2
Part name
HANDLE CROWN AND
STEERING DAMPER REMOVAL
Hold the machine by placing
the suitable stand.
Cowling
Bolt (Front brake reservoir tank)
Front brake caliper
Front wheel
Front fender
1 Steering shaft nut
2 Pinch bolt (handle crown)
3 Handle crown
4 Clip
5 Bolt (steering damper)
6 Steering damper
7 Steering damper bracket
STEERING
80 Nm (8.0 mdkg, 58 ftdlb)
T
15 Nm (1.5 mdkg, 11 ftdlb)
T
T
5 Nm (0.5 mdkg, 3.6 ftdlb)
T
2 Steering damper removal
Q'ty
W
Support the machine securely so there
is no danger of it falling over.
Refer to "COWLING, SEAT AND
FUEL TANK" section in the
CHAPTER 4.
Refer to "FRONT BRAKE AND
REAR BRAKE" section.
Refer to "FRONT WHEEL AND
REAR WHEEL" section.
1
2 Only loosening.
1
1
1
1
1
5-44
CHAS
18 Nm (1.8 mdkg, 13 ftdlb)
Remarks