Yamaha TZ125M1 Owner's Service Manual page 103

CARBURETOR AND REED VALVE
10.Install:
NOTE:
• While compressing the spring, connect the
• Align the projection a on the ring with the
11. Install:
NOTE:
After installing, check the throttle grip for
smooth movement.
EC465310
Carburetor installation
1. Install:
2. Install:
NOTE:
Install the projection between the carburetor
joint slots.
4-15
• Throttle cable 1
• Mixing chamber top 2
• Spring (throttle valve) 3
• Ring 4
• Throttle valve 5
throttle cable.
groove b in the needle holder 6.
• Mixing chamber top 1
• Screw (mixing chamber top) 2
To carburetor 3.
• Carburetor cover 1
• Clamp (carburetor joint) 2
• Carburetor 1
ENG