Yamaha TZ125M1 Owner's Service Manual page 48

1 Tachometer assembly
2 Clamp
3 CDI unit
4 Water temperature gauge lead
5 Wireharness
6 "ENGINE STOP" button
7 CDI magneto lead
CABLE ROUTING DIAGRAM
A Install the tachometer assembly with its figures standing upright.
B Align the tape on the wireharness with the CDI unit mounting boss.
C Install the CDI magneto lead so that it is not loose.
D Clamp the coupler with the clamp ends facing backward on the inside of
the chassis.
E Clamp the wireharness at the center of the tape on it.
2-13
SPEC