Yamaha TZ125M1 Owner's Service Manual page 133

SHIFT SHAFT AND OIL PUMP
EC4E5000
ASSEMBLY AND INSTALLATION
EC4E5101
Strainer
1. Install:
• Strainer 1 1
• Strainer 2 2
NOTE:
• Each strainer is installed with the rounded
corner a facing inward.
• Strainer 1 is installed with the flange b facing
downward.
• Strainer 2 is installed with the mesh c facing
downward.
• After installing the strainers, make sure the
strainer 1 and 2 are not protruding from the
crankcase surface d.
EC4E5202
Oil pump
1. Install:
• Outer rotor 1
• Inner rotor 2
To oil pump housing 3.
NOTE:
Apply the transmission oil on the inner rotor
and outer rotor.
2. Install:
• Oil pump shaft 1
To inner rotor 2.
NOTE:
Install the oil pump shaft with its flat portion a
placed on the flat portion b of the inner rotor.
3. Install:
• Oil pump cover 1
• Screw (oil pump cover) 2
4-45
ENG
4 Nm (0.4 mdkg, 2.9 ftdlb)
T