Yamaha TZ125M1 Owner's Service Manual page 129

PRIMARY DRIVEN GEAR, PRIMARY DRIVE GEAR
AND BALANCER SHAFT
2. Install:
• Dowel pin 1
• Gasket [crankcase cover (right)] 2N
• Thrust plate 3
NOTE:
Install the thrust plate with its chamfered por-
tion a toward the transmission.
3. Install:
• Crankcase cover (right) 1
NOTE:
Mesh the primary drive gear 2 with the prima-
ry driven gear 3, and the oil pump drive gear
4 with the oil pump driven gear 5 by turning
the rotor.
4. Install:
• Bolt [crankcase cover (right)] 1
NOTE:
Tighten the bolts in stages, using a crisscross
pattern.
4-41
ENG
11 Nm (1.1 mdkg, 8.0 ftdlb)
T