Yamaha TZ125M1 Owner's Service Manual page 198

FRONT FORK
26.Install:
• Cap bolt 1
To outer tube.
NOTE:
Temporarily tighten the cap bolt.
EC555263
Installation
1. Install:
• Front fork 1
• Steering damper stay 2 (left side only)
• Handlebar 3
NOTE:
• Temporarily tighten the pinch bolt (under
bracket).
• Do not tighten the pinch bolts (handle crown,
steering damper stay and handle bracket)
yet.
2. Tighten:
• Cap bolt 1
3. Adjust:
• Front fork top end a
• Handlebar position b
• Steering damper stay position c (left side
only)
Front fork top end:
e
18 mm (0.71 in)
Handlebar position:
20 mm (0.79 in)
Steering damper stay position:
Zero mm (Zero in)
Refer to "FRONT FORK TOP END
ADJUSTMENT" in the CHAPTER 3.
5-37
CHAS
23 Nm (2.3 mdkg, 17 ftdlb)
T