Yamaha TZ125M1 Owner's Service Manual page 78

REAR SHOCK ABSORBER INSPECTION/
SEAT HEIGHT ADJUSTMENT
• STANDARD POSITION:
a
This is the position which is back by the spe-
cific number of clicks from the fully turned-in
position.
Standard position:
8 clicks out
NOTE:
Fully turn in the adjuster and then turn it out.
Specify the position in which the first click is
heard as the zero position. If a click is heard
just when the adjuster is fully turned in, this
position is zero.
C C CAUTION:
Do not force the adjuster past the minimum
or maximum extent of adjustment. The
adjuster may be damaged.
W
Always adjust each front fork to the same
setting. Uneven adjustment can cause poor
handling and loss of stability.
EC36K000
REAR SHOCK ABSORBER INSPECTION
1. Inspect:
• Swingarm smooth action
Abnormal noise/Unsmooth
Grease the pivoting points or repair the piv-
oting points.
Damage/Oil leakage ≥ Replace.
EC36L001
SEAT HEIGHT ADJUSTMENT
1. Remove:
• Fuel tank
2. Adjust:
• Seat height
3-28
INSP
ADJ
action
≥