Yamaha TZ125M1 Owner's Service Manual page 183

FRONT BRAKE AND REAR BRAKE
5-22
4. Install:
• Clamp 1
Refer to "CABLE ROUTING DIAGRAM"
section in the CHAPTER 2.
EC545442
Rear brake hose
1. Install:
• Copper washer 1N
• Brake hose 2
• Union bolt 3
30 Nm (3.0 mdkg, 22 ftdlb)
T
W
Always use new copper washers.
C C CAUTION:
When installing the brake hose to the mas-
ter cylinder, lightly touch the brake pipe a a
with the projection b b on the master cylin-
der.
2. Install:
• Copper washer 1N
• Adapter 2
26 Nm (2.6 mdkg, 19 ftdlb)
T
• Brake hose 3 T
14 Nm (1.4 mdkg, 10 ftdlb)
W
Always use a new copper washer.
NOTE:
When turning the adapter over the brake hose,
hold the brake hose so that it may not be twist-
ed.
CHAS