Yamaha TZ125M1 Owner's Service Manual page 188

FRONT FORK
EC556000
HANDLING NOTE
NOTE:
The front fork requires careful attention. So it is
recommended that the front fork be maintained
at the dealers.
C C CAUTION:
To prevent an accidental explosion of air,
the following instructions should be
observed:
• The front fork with a built-in piston rod has
a very sophisticated internal construction
and is particularly sensitive to foreign
material.
Use enough care not to allow any foreign
material to come in when the oil is
replaced or when the front fork is disas-
sembled and reassembled.
• Before removing the cap bolts or front
forks, be sure to extract the air from the air
chamber completely.
EC553000
REMOVAL POINTS
EC553143
Cap bolt
1. Remove:
• Cap bolt 1
From the outer tube.
NOTE:
Before removing the front fork from the
machine, loosen the cap bolt.
2. Loosen:
• Spring preload adjuster 1
NOTE:
Record the set position of the adjuster (the
amount of turning out the adjuster to the fully
turned out position) before loosening it.
5-27
CHAS