Yamaha TZ125M1 Owner's Service Manual page 135

SHIFT SHAFT AND OIL PUMP
EC4B5111
Stopper lever
1. Install:
• Torsion spring 1
• Stopper lever 2
• Bolt (stopper lever) 3
NOTE:
Align the stopper lever roller with the slot on
segment.
EC4E5310
Shift shaft
1. Install:
• Shift shaft 1
NOTE:
Apply the transmission oil on the shift shaft.
2. Install:
• Plain washer 1
• Shift pedal 2
• Bolt (shift pedal) 3
• Shift arm 4
• Bolt (shift arm) 5
NOTE:
• Make sure that the joint rod distance a is
72.5~74.5 mm (2.85~2.93 in).
• Apply the lithium soap base grease on the
bolt (shift pedal).
• Install the shift arm so that the shift pedal is
highest with the distance b between the shift
pedal outer diameter and the bottom end of
the footrest bracket being 17mm (0.67 in) or
more.
4-47
ENG
11 Nm (1.1 mdkg, 8.0 ftdlb)
GT
22 Nm (2.2 mdkg, 16 ftdlb)
T
14 Nm (1.4 mdkg, 10 ftdlb)
T