Yamaha TZ125M1 Owner's Service Manual page 69

DRIVE CHAIN INSPECTION
EC369051
DRIVE CHAIN INSPECTION
1. Remove:
• Master link clip
• Joint 1
• O-ring 2
• Drive chain 3
2. Clean:
• Drive chain
Brush off as much dirt as possible. Then
clean the chain using the chain cleaner.
C C CAUTION:
This machine has a drive chain with small
rubber O-rings 1 1 between the chain plates.
Steam cleaning, high-pressure washes,
certain solvent and kerosene can damage
these O-rings.
3. Inspect:
• O-rings 1 (drive chain)
Damage ≥ Replace drive chain.
• Rollers 2
• Side plates 3
Damage/Wear ≥ Replace drive chain.
a
4. Measure:
• Drive chain length (10 links) a
Out of specification ≥ Replace.
Drive chain length (10 links):
3-19
INSP
ADJ
Limit: 120.0 mm (4.724 in)