Yamaha TZ125M1 Owner's Service Manual page 114

CYLINDER HEAD, CYLINDER AND PISTON
4. Install:
• O-ring 1N
• Dowel pin 2
NOTE:
Apply the lithium soap base grease on the O-
rings.
5. Install:
• Cylinder head 1
• Copper washer 2
• Bolt (cylinder head) 3
NOTE:
• Apply the lithium soap base grease on the
thread and contact surface of the bolt (cylin-
der head).
• Tighten the bolts (cylinder head) in stage,
using a crisscross pattern.
6. Install:
• Spark plug 1
• Spark plug cap 2
• Radiator hose 4 3
4-26
ENG
11 Nm (1.1 mdkg, 8.0 ftdlb)
T
19 Nm (1.9 mdkg, 13 ftdlb)
T
2 Nm (0.2 mdkg, 1.4 ftdlb)
T