Yamaha TZ125M1 Owner's Service Manual page 192

FRONT FORK
EC555000
ASSEMBLY AND INSTALLATION
EC5551C0
Front fork assembly
1. Wash the all parts in a clear solvent.
2. Install:
• Damper rod 1
To inner tube 2.
C C CAUTION:
To install the damper rod into the inner
tube, hold the inner tube aslant. If the inner
tube is held vertically, the damper rod may
fall into it, damaging the valve inside.
3. Install:
• Copper washer 1N
• Bolt (damper rod) 2
To inner tube 3.
4. Tighten:
• Bolt (damper rod) 1
GT
NOTE:
A
Use a damper rod holder 3 to lock the damper
rod 2.
Damper rod holder:
YM-01425/90890-01425
5. Install:
• Locknut 1
To damper rod 2.
5-31
CHAS
40 Nm (4.0 mdkg, 29 ftdlb)