Display User Map; Create User Map (Mark / Line) - JRC JMA-5312-6 Instruction Manual

3.6

DISPLAY USER MAP

Up to 2,000 items (20,000 items when a plotter unit option is connected) of NAV lines, coastlines,
depth contours, and NAV marks can be created, displayed, loaded, and saved. (This function is
available only when navigation equipment is connected to this radar system.)
If the number of items exceeds 2,000, the oldest saved items are sequentially deleted.
Up to 20 items of temporarily used marks can be created and displayed.
Marks that can be used
Lines that can be used
Color of mark and line that can be used
If radar video is poor visibility caused by user map function, press the [DATA OFF] key to map
displays temporarily off.
3.6.1

Create User Map (Mark / Line)

In this system, when the radar is in the transmission state, the user map is displayed all the time.
However, valid latitude / longitude data and true bearing data must be entered into the system.
The user map can be created and edited by performing the following operation.
Plotting a mark
Procedures 1
2
3
4
Press the [MARK] key to select the mark mode.
The mark font to be used is displayed in the mark font switching (upper right of the
display ② on page 2-19).
Put the cursor on mark font switching
display ② on page 2-19), and press the [ENT] key.
The mark fonts are switched.
Put the cursor mark on mark color switching C
display ③ on page 2-19), and press the [ENT] key.
The mark colors are switched.
Put the cursor on a location of the display at which you want to plot
the mark, and press the [ENT] key.
The specified mark is displayed in the specified shape and color.
To create another mark, repeat the above procedures.
: 29 types
: 3 types (solid, broken, and dashed-dotted line)
: 7 colors
3-55
(upper right of the
(upper right of the