JRC JMA-5312-6 Instruction Manual page 411

Table 9-5 List of Route Error Messages and Warnings
Message Class
Approach Alarm
Arrival Alarm
Break Off (WPT) Alarm
Cross Track Error Alarm
ALR No : Unique alarm number in ALR sentence and ACK sentence.
Table 9-6 List of Operational Error Messages and Warnings
Message
Class
Can't Transmit INFO
Card Full INFO
Copy Failed INFO
Delete failed INFO
Format Card INFO
Format Failed INFO
Invalid Card INFO
INFO
Invalid Connection
Invalid Data INFO
Invalid Range INFO
MAX Point INFO
No Card INFO
No Position Data INFO
INFO
No Heading Data
No Object INFO
Not Allowed INFO
Out of Range INFO
Read Failed INFO
Slave Mode INFO
Write Failed INFO
ALR No : Unique alarm number in ALR sentence and ACK sentence.
Description
Approach the route.
Arrive at way point.
Out of the way point.
Go off the route.
Description
Tried to transmit within 5 second after standby or when the
transmitter-receiver has any trouble.
Card : Run out of free space.
Card : Copy failure.
Card : Deletion failure.
Card : Unformatted card.
Card : Format failure.
Card : Invalid card.
The operator set performance monitor to on without selecting
straight.
Tried to enter any data beyond its range.
TM selection due to TM-disabled range (96 nm).
Zooming in a ZOOM-disabled range (0.125 nm).
Tried to enter navigation information beyond the specified.
Card not detected yet.
Mark or line input when the latitude and longitude is invalid.
Target tracking operation or TM selection when bearing data is
invalid.
No object at the cursor-specified position.
General operation error.
Out of operation range.
Card : Read failure.
Operation of a menu for the scanner unit when the slave mode is
active.
Card : Write failure.
9-4
9.1 Fault Finding
ALR
No.
ALR
No.
9