JRC JMA-5312-6 Instruction Manual page 357

[I] Network Function Setting (Network Function)
Turning on/off the network function.
Procedures 1. Open the Serviceman Menu.
2. Open the Network Function menu by performing the following menu
operation.
3. Set the Network for the item
[II] Sensor Priority Setting (Sensor Priority)
The system can receive data from 2 sensors. If the same sentences are received from 2 sensors, the system
use primary system's data.
Procedures 1. Open the Serviceman Menu.
2. Open the Sensor Priority Setting menu by performing the following
menu operation.
3. Select sensors for
Default
Available sensors
No.1 ECDIS No.1 FFD
No.2 ECDIS No.2 FFD
No.3 ECDIS No.3 FFD
No.4 ECDIS No.4 FFD
No.1 MFD No.1 Chart RADAR
No.2 MFD No.2 Chart RADAR
No.3 MFD No.3 Chart RADAR
No.4 MFD No.4 Chart RADAR
2. Installation Menu
→ 9. Next
→ 4. Network
On : The network function is operated.
Off : The network function is stopped.
2. Installation Menu
→ 9. Next
→ 4. Network
1.primary and
1. Primary : No.1 ECDIS
2. Secondary : No.2 ECDIS
Conning Display
No.1 Converter Unit
No.2 Converter Unit
No.1 Alart I/F
No.2 Alart I/F
Port Conning
STAB Conning
No.1 Data Server
i : if you selected "None", the system does not receive data.
7-24
1. Network Function
→ 3. Sensor Priority
2.Secondary .
No.2 Data Server
Console Conning
NAV W/S
No.1 GPS
No.2 GPS
No.3 GPS
No.1 Remote GPS
No.2 Remote GPS
7.2 Settings
in the menu.
7
No.3 Remote GPS
None ⅰ