Operate Software Buttons - JRC JMA-5312-6 Instruction Manual

3.3.2

Operate Software Buttons

Software buttons are provided of the display so as to easily switch functions without operating menu
items.
For software buttons that can be operated and their locations, see Chapter 2.
Procedures 1
2
Put the pointer on the software button of the display.
The software button indicated by the cursor will be shown in reverse video, which
indicates that the button is specified.
Press the [ENT] key.
The operating state changes according to the function of the software button.
On / off settings
Each time the [ENT] key is pressed, the operating state switches as follows:
On ⇒ Off ⇒ On ⇒ Off
Multiple settings
For example, each time the [ENT] key is pressed, the operating state switches as
follows:
IR Off ⇒ IR Low ⇒ IR Middle ⇒ IR High ⇒
3-13
IR Off