JRC JMA-5312-6 Instruction Manual page 130

5
6
7
[III] Erasing save radar trails (Erase RADAR Trails)
Procedures 1
2
3
4
5
6
7
Press the [3] key.
The Input File Name screen will appear.
Enter the file name to be saved.
Up to 15 characters can be entered.
For the input method on the character input screen, see Section 3.3.4.
After characters have been entered, Confirmation Window will appear.
Press the [1] key.
Radar trails data currently being displayed is saved.
Insert a flash memory card into the card slot.
Flash memory card (option) is necessary.
For the insertion and removal of the card, see HOW TO INSERT AND REMOVE A
CARD in the appendix.
Press the [TRAILS] key for 2 seconds.
The RADAR Trails Setting menu will appear.
Open the File Operations menu by performing the following menu
operation.
8. File Operations
Press the [1] key to select a card slot.
Slot1 and Slot2 of the Select Card Slot items are switched.
Press the [4] key.
The File Erase menu will appear.
The list of radar trails saved in the card will be displayed.
Press numeric keys corresponding to the desired file number.
Confirmation Window will appear.
Press the [1] key.
The selected radar trails data is erased and the name of the radar trails data is deleted
from the list.
3-33