Using Card; Operate File On The Card (File Manager) - JRC JMA-5312-6 Instruction Manual

3.11

USING CARD

This radar has two card slots. Inserting a flash memory card (option) into a card slot, you can save
the following contents, saved in the process unit, in the card or can load data from the card to the
process unit.
• Tr
ails o
• Tr
ack o
• M
ark L
•
W aypo t
• Rout
e
These pie ces of inform
a s large as only a file. An internally created file can be saved until the flash memory card is full.
3.11.1 O perate File on the Card (File Manager)
Procedures 1 Insert a flash memory card into the card slot.
Flash memory card (option) is necessary.
For the insertion and removal of the card, see HOW TO INSERT AND REMOVE A
CARD in the appendix.
2 Press the [STBY] ke
The transmission standby st
3 Press the [RADAR MENU] key twice
4 Press the [1] key.
The File Manager win
T
f own ship : 7000 points maximum
f other ship : 20 target×1500 points (the Target Tracking unit, or AIS unit
option is necessary)
ine : 20 00 poi
option is connected)
in : 999 points maximum
: 10 routes maximum (the plotter unit option is necessary)
ation can be saved in a flash memory card as a file. The internal capacity is
y.
ate is activated.
dow will appear.
he window will not be open when the system is in the transmission state.
3-104
nts maximum (20000 items when the plotter unit
(the plotter unit option is necessary)
.

3.11 Using Card

3