JRC JMA-5312-6 Instruction Manual page 150

[II] Saving own ship's track data (Save Own Track)
Procedures 1
2
3
4
5
6
[III] Erasing own ship's track data (Erase Own Track)
Procedures 1
2
3
4
Insert a flash memory card into the card slot.
Flash memory card (option) is necessary.
For the insertion and removal of the card, see HOW TO INSERT AND REMOVE A
CARD in the appendix.
Open the File Operations menu by performing the following menu
operation.
O.TRK
→ 5. File Operations
Press the [1] key to select a card slot.
Slot1 and Slot2 of the Select Card Slot items are switched.
Press the [4] key.
The character input screen for Input File Name will appear.
Enter the file name to be saved.
Up to 10 characters can be entered.
For the input method on the character input screen, see Chapter 3.3.4.
After entry has been finished, Confirmation Window will appear.
Press the [1] key.
Own ship's track data currently being displayed is saved.
Insert a flash memory card into the card slot.
Flash memory card (option) is necessary.
For the insertion and removal of the card, see HOW TO INSERT AND REMOVE A
CARD in the appendix.
Open the File Operations menu by performing the following menu
operation.
O.TRK
→ 5. File Operations
Press the [1] key to select a card slot.
Slot1 and Slot2 of the Select Card Slot items are switched.
Press the [5] key.
The Erase screen will appear.
The list of own ship's track data saved in the card will be displayed.
3-53