Switch Transmitter Pulse Length [Gain / Pl; Switch Azimuth Display Mode [Azi Mode - JRC JMA-5322-6HS Simplified Manual

Cancellation
1 Press the [VRM1] or [VRM2] key again.
The selected VRM display will disappear.
2.10

Switch Transmitter Pulse Length [GAIN / PL]

Procedures
1 Press the [GAIN / PL] dial.
The selected pulse length will be displayed in the pulse length indication.
2.11

Switch Azimuth Display Mode [AZI MODE]

Procedures
1 Press the [AZI MODE] key.
The azimuth display modes are switched.
S-10
Simplified Manual