JRC JMA-5312-6 Instruction Manual page 64

OPTION
HEATER CONTROL PART
CIRCUIT BREAKER (5A)
(SHIPYARD SUPPLY)
0.6/1kV-DPYCYS-1.5
0.6/1kV-DPYC-1.5
AC100V,50/60Hz,1φ,100W
NBL-175 STEPDOWN TRANSFORMER
0.6/1kV-DPYC-1.5
SHIP'S MAIN
AC220-240V,50/60Hz,1φ
LAN CABLE H-7ZCNA0483
JRC LAN
(JRC SUPPLY, OPTION)
H-2695111153 MAX φ18
INTERSWITCH
(JRC SUPPLY, OPTION)
250V-TTYCS-4
AIS
250V-TTYCS-1
LOG(NMEA)
250V-MPYCYS-7
GYRO
250V-DPYCYS-1.5
LOG(200P)
250V-TTYCS-1
GPS
SHIP'S MAIN
AC100-120/220-240V,50/60Hz,1φ
NOTE: Eliminating the interference on frequencies used for marine communications and navigation due to
operation of the radar.
All cables of the radar are to be run away from the cables of radio equipment.
(Ex. Radiotelephone. Communications receiver and direction finder, etc. )
Especially inter-wiring cables between scanner unit and display unit of the radar should not be run parallel
with the cables of radio equipment.
Performance monitor, ARPA/ATA Process Circuit, AIS Process Circuit and GYRO Interface Unit must be
fitted on ships compliant to IMO.
Fig. 1.16 General System Diagram of JMA-5322-7/9/6HS RADAR
NKE-2254-7/9/6HS SCANNER UNIT
19 CORES COMPOSITE CABLE
CFQ-6912
MAX φ14.5 (JRC SUPPLY)
NCA-877WA/877A
ARPA/ATA PROCESS UNIT (OPTION)
NDB-34A PLOTTER CONTROL UNIT
(OPTION)
NQA-2103 AIS PROCESS UNIT
(OPTION)
NCT-59A GYRO INTERFACE UNIT
(OPTION)
NBA-5111 POWER SUPPLY
0.6/1kV-DPYC-6
1-23
NJU-85 PERFORMANCE MONITOR
(OPTION)
NCM-853-E CONTROL UNIT
NDC-1417 RADAR PROCESS UNIT
(JRC SUPPLY) 5m
CFQ-5436-5
MAX φ10 (JRC SUPPLY) 5m
DC24V
NCD-4530 DISPLAY UNIT
NWZ-173 LCD MONITOR
(JRC SUPPLY) 5m
(JRC SUPPLY) 5m
(JRC SUPPLY) 5m
NCE-5171 OPERATION UNIT