JRC JMA-5312-6 Instruction Manual page 156

Setting display by color
Procedures 1
2
3
4
5
Setting the mark font size
Procedures 1
2
3
Press the [MARK] key for 2 seconds.
The Mark Setting menu will appear.
Open the Display Mark Color menu by performing the following menu
operation.
2. Display Mark Color
Press the [1] key.
Selected items for All will be displayed.
Press the [3] key to make
Off : All colors are not displayed.
On : All colors are displayed.
Individual : Setting by color is activated.
Press numeric keys corresponding to each mark font / line pattern
display.
On : Displayed.
Off : Not Displayed.
Press the [MARK] key for 2 seconds.
The Mark Setting display will appear.
Open the Select Mark Size menu by performing the following menu
operation.
4. Select Mark Size
Press numeric keys corresponding to the mark font size to be set.
Normal : The mark is displayed in normal size.
Small : The mark is displayed in a size smaller than usual.
Individual setting.
3-59