Operate Radar Trails File (File Operations) - JRC JMA-5312-6 Instruction Manual

3.4.10 Operate Radar Trails File (File Operations)

[I] Loading radar trails (Load RADAR Trails)
Procedures 1 Insert a flash memory card into the card slot.
Flash memory card (option) is necessary.
For the insertion and removal of the card, see HOW TO INSERT AND REMOVE A
CARD in the appendix.
2 Press the [TRAILS] key for 2 seconds.
The RADAR Trails Setting menu will appear.
3 Open the File Operations menu by performing the following menu
operation.
4 Press the [1] key to select a card slot.
Slot1 and Slot2 of the Select Card Slot items are switched.
5 Press the [2] key.
The list of radar trails saved in the card will be displayed.
6 Press numeric keys corresponding to the desired file.
Confirmation Window will appear.
7 Press the [1] key.
The selected radar trails data is loaded and displayed of the display.
[II] Saving radar trails (Save RADAR Trails)
Procedures 1 Insert a flash memory card into the card slot.
Flash memory card (option) is necessary.
For the insertion and removal of the card, see HOW TO INSERT AND REMOVE A
CARD in the appendix.
2 Press the [TRAILS] key for 2 seconds.
The RADAR Trails Setting menu will appear.
3 Open the File Operations menu by performing the following menu
operation.
4 Press the [1] key to select a card slot.
Slot1 and Slot2 of the Select Card Slot items are switched.
8. File Operations
8. File Operations
3-32
3.4 General Radar Operation
3