Operation Test (Tt Test Menu) - JRC JMA-5312-6 Instruction Manual

5.2.7 Operation Test (TT Test Menu)

Target Tracking Function Test is provided to test if the
target tracking function is operating normally. Thus, do
not use the function except when you test the target
tracking function.
In particular, if the operation test mode is used during
navigation, pseudo targets appear on the radar display and
they are confused with actual targets.
Do not use the mode during navigation.
Otherwise, an accident may result.
The following functions are available for testing the target tracking function:
[I] Test Video
[II] TT Simulator
[III] Status
[IV] Gate Display
CAUTION
Makes an operation check on the target detection circuit.
Generates pseudo targets on the radar display in order to test if the target
tracking function is operating normally.
Displays the status of the target tracking function.
Displays the gate size for acquiring / tracking a target.
5-26
5.2 Target Tracking Operation
5