Correcting Chart Position (Map Display Setting) - JRC JMA-5312-6 Instruction Manual

3.12.7 Correcting Chart Position (Map Display Setting)

Procedures 1 Press the [Map] key for 2 seconds.
The Map Setting menu will appear.
2 Press the [5] key.
The Map Display Setting Menu will appear.
There are three methods for correcting the chart position.
[1] Shift Coast Line 1
With regard to display Coast Line 1, set the correction value by operating the cursor.
Procedures 1 Press the [1] key while the Map Display Setting Menu is open.
The chart display position correction 1 (Shift Coast Line 1) is set.
2 Move the cursor to the chart on which a position is to be corrected,
and Press the [ENT] key.
3 Move the cursor to the radar video of which position is to be
corrected, and Press the [ENT] key.
At this time, Map Shift is displayed in the map position correction (lower right of
the display on page 2-4), indicating that the position is being corrected.
Note: A correction value can be operated in the range -9.999' to +9.999'.
Cancellation 1 Press the [1] key while the Map Display Setting menu is open.
At this time, Map Shift is not displayed in the map position correction (lower right
of the display on page 2-4).
Setting (correcting) will be indicated for Shift Coast Line 1.
Delete (no correction) is selected for the Shift Coast Line 1.
3-120
3.12 Display Simple Chart
3