Adding Tracked Target Id Name (Name) - JRC JMA-5312-6 Instruction Manual

5.2.5 Adding Tracked Target ID Name (Name)

The system can enter a name for each of tracking targets that have been acquired.
Procedures 1
2
3
4
Entering a new ship name (Input)
5
Selecting one of previously input ship names (Data Base)
5
* Data Base can contain 30 ship names.
Put the cursor on the tracked target, and press the [CLR / INFO] key.
The cursor mode list will appear.
Press the [8] key.
The TT Target Information will appear.
Press the [1] key.
The setting items for ship name (Name) will be displayed.
Select the input method.
Data Base : Selection of one of previously input ship names.
When this method is selected, a list of ship names that have been input
by selecting Input will be displayed.
Input : Input of a new ship name.
When this method is selected, the ship name (Name) input window
will open.
Off : Target ship's name is not displayed.
Input a new ship name.
Up to 8 characters can be input as a ship name.
For the input method on the character input screen, see Section 3.3.4.
The input name by selecting Input is saved in Data Base .
Press the [numeric] key corresponding to the ship name to be
selected.
The selected ship name will be entered.
5-23