Function Setting Menu Items (User Function Setting) - JRC JMA-5312-6 Instruction Manual
Hide thumbs
Also See for JMA-5312-6:
- Brochure (6 pages) ,
- Installation manual (160 pages) ,
- Simplified manual (24 pages)
Table of Contents
Advertisement
3.9.2
Function Setting Menu Items (User Function Setting)
The function setting menu has the items below.
Page 1
1. Mode
2. IR
3. Process
4. Target Enhance
5. AUTO STC/FTC
6. Save Present State
Page 2
1. Pulse Length 0.75NM
2. Pulse Length 1.5NM
3. Pulse Length 3 / 4NM
4. Pulse Length 6 / 8NM
5. Pulse Length 12NM
6. Pulse Length 16NM
Page 3
1. Video Latitude
2. Video Noise Rejection
3. AUTO Dynamic Range Automatic dynamic range control
4. Process Switch
5. 2nd Process Mode
6. Process Switch Range
7. Fast Target Detection
Page 4
1. Trails Interval
2. Trails Mode
3. Trails Reference Level
4. Trails Reduction
5. Time / All Combine
6. Trails Process
7. Max Interval
Page 5
1. Gain Offset
2. PRF
3. Small Buoy Detection
4. Fishnet Detection
5. Antenna Height
Name of the mode to be used
Radar interference rejection
Video process
Target enhance
Automatic clutter suppression
Saving of the present state
Standard pulse length of 0.75 NM range
Standard pulse length of 1.5 NM range
Standard pulse length of 3 NM range
Standard pulse length of 6 NM range
Standard pulse length of 12 NM range
Standard pulse length of 16 NM range
Dynamic range of radar video
Radar video noise rejection
Radar video process switching
Second video process mode
Video process switching range
Fast moving target detection
Radar trails length
Radar trails mode
Radar trails plotting threshold
Thinning of radar trails
Superimpose-display of time radar
trails and continuous radar trails
Radar trails video process
Maximum time for radar trails display
Gain correction
Pulse repetition frequency
Small target detection mode
Fishnet detection mode
Antenna height
3-97
Coast / Deepsea / ････
Off / Low / Middle / High
PROC Off / 3Scan CORREL / ････
Off / Level1 / Level2 / Level3
Off / AUTO Sea / AUTO Sea/Rain
SP1 / MP1
SP1 / MP1 / MP2 / MP3
MP1 / MP2 / MP3 / LP1
MP1 / MP2 / MP3 / LP1 / LP2
MP1 / MP2 / MP3 / LP1 / LP2
MP1 / MP2 / MP3 / LP1 / LP2
Narrow / Normal / Wide / Super Wide
Off / Level1 / Level2
Off / On
Off / Range FIX / AUTO
PROC Off / 3Scan CORREL / ････
Range setting
Off / On
Off / 15sec / ････
True / Relative
Level1-4
Off / Level1-3
Off / On
Off / On
Short / Middle / Long / Super Long
Correction value setting
Normal / Economy / High Power
Off / On
Off / On
Default / -5m / 5-10m / 10-20m / 20m-
Advertisement
Table of Contents
Troubleshooting
