Figure 4.5 Turning The Power On - Fujitsu Primepower200 User Manual

CHAPTER 4 PRIMEPOWER400 Pedestal Server
Procedure
Note:
56
1
Turn the AC main line power on.
2
Turn the power switches of the console terminal and peripheral devices on.

Figure 4.5 Turning the power on

3
Press the POWER switch on the control panel of the PRIMEPOWER400 Pedestal Server.
The POWER LEDs of the PRIMEPOWER Server and any peripheral devices connected via the
RCI port should now light up.
Operation of the POWER switch is disabled when the MODE switch is set to SECURE.
A keyboard power-on function is not supported.